.png)
 copy.png)
Gardner Tackle
Gardner - Drop Out Chod Safety Clips
For several years we have been trying to come up with a solution to creating a reliable lead discharge system for helicopter rigs – a system that would be more reliable than simply tying a few overhand knots in a piece of 3lb or 4lb monofilament which we found inconsistent and unreliable.
Gardner - Feature Finding Leads
The dumpy shape slows down as it hits the water, enabling you to control the Feature Finders decent, and the rounded nose enhances the feel as the lead hits the lake/river bed.
Gardner - Dumpy Back Leads
The ideal all purpose back leads. These Dumpy Back leads slide freely down the line and are supplied with 2 types of clip, making them suitable for use in all kinds of carp angling situations.
Gardner - Tungsten Flying Back Leads
They’re extremely quick and easy to add or remove from the main line, without having to re-tackle. You just slide the line in or out of the central bore using the micro fine slice along one side that can be easily located using the small recess/guide set along the back edge of the backlead.
Gardner - Zig Rig Foam
Super buoyant, close cell foam – ideal for balancing baits and rigs. Excellent when cut down and fished on a Zig Rig or other floater methods. The super buoyancy means Zig Rig hook baits can be kept smaller; a proven technique for catching out Carp that have been fished for with conventional baits on Zig Rigs in the past.
Gardner - Zig Rig Session Pack
Carp spend lots of the time swimming mid-water or near the surface, especially during spells of sunny warm weather and high air pressure. Conventional tactics will often prove ineffective, simply because the fish are not often visiting the lake bed to feed. When this is the case a small buoyant bait presented at the correct depth in the water column will often induce a bite.
Gardner - Rigwise Dissolving Foam Fluoro
Dissolving Rig Foam can also be used to pack open ended spods to prevent loss of dry baits like pellet during long casts. Large re-sealable bag can be reused time and time again. Biodegradable foam is environmentally safe. Contains free ‘session pot’. Net weight = approx 50g of foam. *Top Tip – For quick release of foam or use in winter just nick the foam onto the hook and avoid compressing it where possible.
Gardner - Rigwise Dissolving Foam
Dissolving Rig Foam can also be used to pack open ended spods to prevent loss of dry baits like pellet during long casts. Large re-sealable bag can be reused time and time again. Biodegradable foam is environmentally safe. Contains free ‘session pot’. Net weight = approx 50g of foam. *Top Tip – For quick release of foam or use in winter just nick the foam onto the hook and avoid compressing it where possible.
Gardner Rig Glue Dispenser
Gardner rig glue is ideal for attaching small baits, cork or foam to hook shanks, etc. Also useful on knots, it will increase knot strength with both mono and braid by seeping in and preventing strangulation. Use sparingly, especially on braids; one drop is often too much – try applying just a smear. Contains 5 grams Cyanoacrylate (Super Glue) per pen. Bonds instantly to virtually any surface. Built-in sealant pin in lid prevents the glue from blocking the nozzle.
Gardner Latex Bait Bands
These very strong, high quality latex elastic bait bands are perfect for attaching all boilies, particles, floaters, etc. to the hook shank or onto rig rings on D-rigs. Approx. 100 bands per pack. Available in 3 sizes: 3.2mm, 4.8mm and 6.4mm. Use the smallest 3.2mm bands on baits up to 12mm diameter, the medium sized 4.8mm bands for up to 16mm and the largest 6.4mm size for 18mm and anything bigger.
Gardner - Critical Mass Putty
It is ideal for fine tuning and balancing buoyant hookbaits or pinning down hooklinks and main line. Tungsten Putty is also very useful for smearing along braided hooklinks to pin them down tight to the lake bed. This is a successful rig tweak that also adds a small degree of stiffness to the braid which helps to reduce tangles.
Gardner - Lo Bore Tube Threaders
The threaders can be threaded through any tube with a higher internal diameter even easier, for instance Covert Tungsten Rig Tubing that has an I/D of 0.8mm.