.png)
 copy.png)
Sleeves & Tubing
Nash - Cling On Tubing 2mtr
Ultra-supple fast sinking tungsten impregnated anti-tangle tubing for improved rig concealment.
Nash - Tungsten Anti-Tangle Sleeve
Streamlined tungsten sleeves that eliminate tangles and kick hooklinks out as the rig settles for improved presentation. Push fit over swivels and quick change swivel systems.
Nash - Helicopter Sleeve
Diffusion Camo Helicopter Sleeve for rig release and carp safety in event of main line breakage.
ESP - Line Aligners
With a perfect balance of rigidity and flexibility, Line Aligners extend the hook shank at exactly the right angle to maximumise hooking potential and then flex enough to avoid interfering with direct in-line pull and secure hook hold.
ESP - Helicopter Rig Sleeves
These Helicopter Rig Sleeves are produced in an extra tough, flexible polymer in weedy green, camo brown and choddy silt. The semi-translucent effect makes them less obtrusive than solid coloured components. These sleeves are a snug streamlined fit over ESP Clip Links.
ESP - Streamliner Rig Sleeves
Perfect solution to reducing tangles by ensuring hooklinks are kicked away from the lead. Available in two colours, weedy green and camo brown.
ESP - Streamliner Rig Boom
Streamliner Rig Booms have three prime functions. To mask and protect the knot, to act as a stiff boom to prevent tangles and to help lay the hooklink out away from the lead. Unlike other anti-tangle sleeves which tend to float up off the bottom at an angle, these are moulded in a heavy polymer which lays flat, minimumising the need for tungsten putty.
ESP - Tungsten Loaded Tubing
Incredibly supple and weighing 8.5g per metre (ESP Leadcore weighs 2.5g per metre), Tungsten Loaded Tubing will follow lake bed contours and keep the last few feet of mainline pinned down, while providing exceptional abrasion resistance. The internal bore diameter of 0.65mm will accommodate tapered and thick mono leaders for distance casting and is easy to thread, even when wet.
ESP - Heat Shrink Tube
When heated will reduce in size to half its original diameter, forming a tough protective sleeve over a range of joints. When heated the Heat Shrink Tube will reduce in size to half its original diameter, forming a tough protective sleeve which can be curved or angled. Available in three diameters with the 1.6mm best for line aligner rigs and the 2.4mm for Ronnie rigs. The 3.2mm can be used for sleeving lead loops and swivels.
ESP - Rig Shrink
Rig Shrink is a low diameter shrink tube, suitable for all the popular carp hook sizes from 2 to 10. Rig Shrink was designed for the production of neat, anti-eject rigs. Specially formulated so that it is just stiff enough to take and retain any angle or bend set in during shrinkage.