When heated will reduce in size to half its original diameter, forming a tough protective sleeve over a range of joints. When heated the Heat Shrink Tube will reduce in size to half its original diameter, forming a tough protective sleeve which can be curved or angled. Available in three diameters with the 1.6mm best for line aligner rigs and the 2.4mm for Ronnie rigs. The 3.2mm can be used for sleeving lead loops and swivels.
Rig Shrink is a low diameter shrink tube, suitable for all the popular carp hook sizes from 2 to 10. Rig Shrink was designed for the production of neat, anti-eject rigs. Specially formulated so that it is just stiff enough to take and retain any angle or bend set in during shrinkage.
Silicone tube has a multitude of uses in carp fishing and with five diamters available the ESP tube covers everything. From trapping the hair against the hook shank and using for the top bead on leadcore with the 0.5mm, to multi rigs with the 0.75mm and 1.0mm, to sleeving lead loops and swivels with the 1.5mm and 2.0mm.
The trusty old ESP 5mm rubber beads have been a staple component for helicopter and chod set ups on leadcore since 1999 and now they have been given the heavyweight tungsten treatment with the introduction of Tungsten Loaded beads.
The Spinner rig is one of the most popular and effective carp-catching presentations around at the moment, but tying them from scratch can be time consuming, not to mention daunting if you have never attempted it before.
These rigs come tied using the highly popular and very versatile Wide Gape hook pattern and 18lb Supernatural braid in weedy green pattern, and at 4.5 inches in length are the perfect choice for PVA bag fishing.
The hinged stiff rig can be complex to tie, but once mastered, there is no better big-fish rig. To allow you all to harness the power of the hinges, we've made a ready-tied version.
The Multi Rig is a superbly versatile rig, which allows the hook to be changed in a flash. They are most often used as pop-up rigs, but can be used with bottom baits too!
The rigs cover every carp angling situation with the range of hook sizes – from day ticket carping for double-figure fish to Euro giants - and they’re perfect for use in conjunction with wafter or balanced hook baits, one of Tom Dove’s favourite presentations.
Tied to the Korda product development team’s exacting specifications, the new range of ready-tied zig rigs take all the hassle out of tying perfect zig rigs and they come with three free foam hook baits in pink, yellow and black. With a choice of 12, 10, 8 and 6ft rigs tied to barbed or barbless Mixa hooks and 8lb mono, the range covers every eventuality and the EVA foam spools protect the rigs, leaving them ready for action at a moment’s notice.
The IQ D-rig is perfect for use with a boilie approach and Dan nearly always uses it with one of his wafter hook baits, which just sit above the hook when on the lake bed. The rigs are available in barbed and barbless variants, and in sizes four, which is tied to 15lb IQ2, six, which is tied to 12lb IQ2 and eight, which is tied to 10lb IQ2.
These pre-tied KD rigs are a worthy addition to our ready-tied rig range, such is the popularity and effectiveness of this presentation. Korda was at the very heart of the KD-rig revolution a few years back, and the likes of Tom Dove and Ali Hamidi still use it, as well as its variant, the Muzza. So, with this in mind, we wanted to make sure that our ready-tied version was what we considered to be the ultimate KD on the market. After Tom tied and approved what he considered to be the perfect KD rig, we had it copied by our rig tiers. You’ll notice that each ready-tied rig has been meticulously produced, to Tom’s exacting specifications. The result is a range of rigs that Tom himself would happily cast out and use with confidence!